1. Before using the micro tiller, please run in the engine and chassis without load for more than 12 hours at the middle throttle. Drain the engine and chassis running in oil (sediment can be added to the chassis), clean the oil filter, and add clean CD grade 40 # diesel oil before use.

2. During the initial use of a micro tiller, it is important to avoid overloading. It should be tilled with medium or low loads for at least 48 hours, and the engine and chassis oil should be replaced (clean the engine and chassis before adding clean oil).

3. After the running in period, change the oil every 180 hours of cultivation.

4. During cultivation, pay attention to cleaning the surface of the machine to maintain its heat dissipation.